How To Install Window Blinds In Jacksonville

Numerous Jacksonville residents turn to window blinds when they want more privacy and governance over daylight in their homes. They’re a functional and budget-friendly window treatment. Skilled DIYers could also attach them in just a few steps. However, nothing is better than working with an expert window treatment installer. Here are the essential steps of installing window blinds and when to call the professionals to do it for you.

Take Precise Measurements

Before you start, decide if you should get outside-mount or inside-mount blinds. This critical detail will help you see where to measure. Get measurements of the width, height, and depth inside your window frame for inside-mount blinds. When attaching outside-mount blinds, mark the height and width of your window, counting the trim, and add three inches to each measurement to ensure adequate coverage. Measure exactly–refrain from rounding up or down. Poorly fitting blinds won’t function smoothly.

Choose Your Blinds

Once you have your measurements, you can shop for blinds. You might already know what kind of blinds you wish to have. Buy blinds that equal your measurements as closely as possible. Off-the-rack blinds often won’t fit exactly, either extending out too far or not getting to the end of the window properly. Make sure you have hardware that let you attach the blinds at the proper depth, also. You should go with specially made blinds and hardware for a perfect fit.

Install Your Blinds

Your blinds should be accompanied by instructions. Use them to attach your particular product. If you wish to have a glimpse of how challenging it is to install window blinds in Jacksonville, here are some common steps to provide a better understanding.

 

Inside Mount Blinds

 

1. Affix a bracket on the top of the window’s frame about an inch from the outer edge. Ensure this positioning won’t hinder the blind’s operating mechanisms. Indicate the bracket holes using a pencil.
2. Drill pilot holes in the indicated areas.
3. Align the bracket holes where you drilled and fasten with screws.
4. Redo the first three steps for the second bracket.
5. Pop the end caps onto the blind’s top rail. Slide the rail into the brackets.

Attach the tilt wand and try it out. Also, evaluate the pull cord.

Outside Mount Blinds

1. Decide if you’re attaching to the window trim or wall above the window. Hold the headrail in place and make sure the blind reaches the lower edges of the window.
2. Mark each end of the headrail.
3. Measure four inches from both headrail marks and mark your bracket holes here.
4. Drill pilot holes in the proper spots.
5. Align the bracket openings with the drilled holes and secure with screws on both sides.
6. Position the headrail into the brackets.

Hook on the tilt wand and try out everything to ensure it works.

Opt For The Easiest Way To Install Blinds 

As you know, you don’t need to put up blinds on your own. The simplest way to install window blinds in Jacksonville is to hire a professional window treatment installer. They will work with you at every step. They’ll help you find blinds that meet your needs and preferences, make accurate measurements for a custom-made product, and install them for you. They support customers every day, so they’ll handle your job efficiently and precisely. They will troubleshoot any concerns without taking hours trying to find help on websites. A window treatment specialist will also offer a higher quality of blinds than box stores or online resellers.

Avoid The Hassle And Hire Sunburst Shutters To Install Your Window Blinds In Jacksonville

Installing window blinds in Jacksonville couldn’t be simpler when you turn to Sunburst Shutters Jacksonville. We’ll help you select made-to-order blinds that will match your windows perfectly, and our professional installation staff will put them up for you. All you have to do is contact 904-289-1663 or complete the form below to request a complimentary in-home consultation.